description

FLASHTAG FULL: FLASHPRO V + TRIPROX + BDMPRO + SECURITY APP (cabling provided)

The FLASHTAG FULL instrument is a solution for cars equipped with EDC17, MED17, MEDV17 and other new generation control units.

The device supports CAN-bus (ISO 15765-4 and SAE - J2234), K -line (ISO 9141-2 and ISO 14230-4) and UDS TP2.0 protocols. In most cases, the checksum is corrected on the fly without an online connection. A wide range of accessories makes it possible to read and write content using the OBDII port. It has a TRIPROX interface with cables that permit the use of TRICORE control units with bootloader.

FLASHTAG TRIPROX

FLASHTAG TRIPROX supports TRICORE Infineon control units with the latest anti-tuning protection and any type of XROM memory: Spansion: CD016J, CD032J and even the most recent: CL016J and CL032J (not supported by any other instrument until now). All checksums are calculated automatically

TRIPROX allows you to operate in absolute SAFETY: no soldering (possibility of dedicated connectors) and no short circuiting due to incorrect wireless connections thanks to the innovative SECURITY APP.

The FLASHTAG FULL software automatically backs up the content on the control unit; for example, you can continue the IROM/XROM writing process if it is interrupted.

BDMPRO

Another accessory of the FLASHTAG FULL is the BDMpro, a state-of-the-art device for reading, programming, backing up and restoring the three main components of control units with the Motorola microprocessor series MPCXX and which supports many cars, motorcycles, trucks and tractors.

An 8-wire cable and a bench with special adapters (optional) are used for communication between the BDM programmer and the control unit. There is no need for soldering the contact bars on the BDM port of the control unit to connect to the board. The backup/restore functions permit reading of the entire content of the control unit in a single file. Accuracy of this reading is ensured by special process software that automatically checks the data. Security is also guaranteed by automatic correction of the checksums during the writing process. With these two functions it is always possible to cancel operations and to restore the initial conditions of the control unit.

Furthermore, the Backup/Restore functions allow one to create a copy of the control unit for use on other hardware, if the original is destroyed or simply damaged.

Strenghts:

  • OBD and BOOT LOADER connection
  • Automatic correction of the checksum (including EPROM)
  • Recovery in the event of errors or unforeseen events
  • BDM mode
  • Automatic recognition of control unit model
  • Supports entire content of backup unit
  • Supports engine and gearbox controls

The Processors:

  • MOTOROLA MPC5xx
  • MOTOROLA 68000HC
  • MOTOROLA HC12
  • MOTOROLA NEXUS MPC5xxx
  • RENE
  • RENESAS M32
  • MITSUBISHI MH72xx
  • MITSUBISHI MH8xx
  • INFINEON TRICORE
  • ST10
  • SAS SH705xx

News Veloci

SpazioZero Gerenza
BMW F PRO
BMW F series
+ -
Apex
Longer life for your engine
+ -
FlashPro V
Programming of EOBDII control units
+ -
FlashTag Full
Programming of BOOT MODE/BDM control units
+ -
Decotech
Decoding, Revirgination and Conversion of Control Unit
+ -
DimDecoder
Decoding, Revirgination and Conversion of Control Unit
+ -
DimSeven
Decoding and Revirgination of 8/16/18 F Magneti Marelli
+ -
DimSystem
Universal Programmer and Memories
+ -
Zed-Full
Duplication of Keys and Remote Controls
+ -
ATF Automatic System Cleaner
Fully automatic oil change replacement & cleaning
+ -
ATF Manual System Cleaner
Manual oil change replacement & cleaning
+ -